Contact Instanta
Call 01704 501 114 or
email sales@instanta.com

Your basket

CLOSE ×

Your Shopping Basket is empty

If you have tried to add something to your basket but it is still empty, you may not have 'cookies' enabled on you computer.

WMS2 WALL MOUNTED SUREFLOW AUTO-FILL (WA2N)

WATER BOILERS

WMS2 WALL MOUNTED SUREFLOW AUTO-FILL (WA2N)

£597.00 (Ex VAT)

In stock
WMS2

The Wall Mounted SureFlow range offers three wall mounted models with simple stainless steel cases providing a plentiful supply of boiling water. For customers who are working to a budget and want Instanta quality and reliability but with slightly lower specification.

2 YEAR WARRANTY
WRAS Approved Product

Features and Benefits
· Introductory diagnostic system
· Three models available
· Large heavy duty non-drip taps
· Mirror finished stainless steel case


Installation
As per instruction manual supplied.


Plumbing
Designed for direct connection to a potable cold water supply using fittings supplied. An isolating valve should be installed between the supply and the heater. These wall mounted boilers have a rear connection and overflow and requires two bar incoming water pressure.


Electrical
To be connected to 230 volt 13 amp supply.


Construction
Polished stainless steel case.
Stainless steel heating chamber.
Low voltage switching.
Two safety cut outs.


Approvals
WRAS approved.

SELECTED FEATURES

Basic fault self-diagnosis
Long-life incoloy elements
Boil dry protection
Insulated for minimal heat loss
Mirror finish stainless steel case
Over-fill protection against lime-scale
Easy service and cleaning access

SPECIFICATION FOR WMS2 InstaTap Wall Mounted SureFlow

Height (mm)
428
Width (mm)
254
Depth (mm)
187
Tap Depth (mm
85

TECHNICAL DATA FOR WMS2 InstaTap Wall Mounted SureFlow*

Power loading (kW)
2
Heat-up time (mins)
13
Recovery Rate (litres)
0.35
Stand by Power (kW/h)
0.1
Rapid Draw-Off (litres)
2.5
Rapid Draw-Off (cups)
15
Hourly Output (litres)
20
Hourly Output (cups)
120
* Based on 6 Cups Per Litre

ENQUIRY FORM


* Mandatory field
//?>